LARGE CANOPY TENTS & EVENT CREST TENTS

The Crest Tents advertised on our website have been designed and approved by our engineers to meet regulations in most of the US. These tents have been designed to comply with “Temporary Structures” regulations and cannot be left up for more than 6 months for any one event. Should the time being used at one event exceed 6 months, it is considered to be a permanent structure and we will need to redesign the frame so that it will comply. This means upgrading the aluminum profiles used so that it can withstand stronger wind gusts. We will need to know the size required and the location that it will be erected so our engineer can make sure the structure is compliant. The frame will need further upgrading if it is in an area that has snow.

There are three ways to anchor the tent to the ground.
1) Steel pins ( for use on standard ground i.e grass or soil surfaces). This is the simplest method.
2) Weight plates. Weight plates are attached to each foot and then concrete blocks are placed on each foot. Our engineer will advise the weight required.
3) If erected on a concrete slab, the frame can be anchored by concrete fixing bolts.

Engineers notes:

We have made the following assumptions when performing our preliminary analysis for this tent: − Calculations are in accordance with the 2015 International Building Code (in reference to ASCE 7-10) − A-Frame overall tent profile and aluminum member sections are utilized − Classified as a temporary structure as defined by the building code – Temporary structures are defined as structures that will be in place for less than 180 days. The tent structure has been analyzed for reduced wind speeds due to its temporary nature. − Designed for a 115 mile per hour (185 kilometer per hour) design wind speed (which covers most, but not all, of the United States for a Risk Category II structure) − Located in Exposure Category C (i.e. the site is at least 1,000 feet away from the ocean/large body of water/open field and there are, at a minimum, scattered obstructions such at trees and buildings between the site and the ocean/large body of water/open field) − Considered partially enclosed (walls that have significant openings to allow wind to enter the tent, for further definition see ASCE 7-10 Chapter 26) − Located at grade level (i.e. not elevated on another structure, such as a roof or scaffold) with no significant topography (i.e. not at the crest of a hill or escarpment) pg. 2 November 27, 2018 − Designed to consider only the self-weight of the tent frame, the fabric skin, and minimal water accumulation such as during heavy rain (no more than 1/2 inch of water, i.e. no ponding) − No snow or ice accumulation is allowed or considered in our analysis − Any hanging equipment is excluded from the analysis.

LARGE EVENT TENTS CUSTOM-DESIGNED FOR YOUR NEEDS

Whether you are hosting an outdoor wedding, a trade show or any other large event, you need high-quality shelter you can count on to keep your guests comfortable while looking great in the process. To meet your needs, our Crest Range features large tents in a number of sizes with a host of custom options for one-of-a-kind shelter solutions that can be used in virtually any setting. Here are a few of the advantages that come with ordering an event tent from our Crest Range.

• • Sizing Options. Crest Range tents can be ordered in widths as small as 10 feet or as large as 200 feet. Length is virtually unlimited, and bays can be 10 or 15 feet in size.
    • Add-Ons. Crest Range tents can be ordered with a number of add-ons to meet the demands of any event. Add-ons include modular floor systems, tasteful fabric ceilings and see-through walls and doors.
    • Custom Printing. Crest Range tents can be customized with printing options to add text, logos and even photographs to their exteriors. Our manufacturers use the highest-quality printing equipment and fade-resistant inks to ensure high-resolution printing that lasts a lifetime.

WHY ORDER A CREST RANGE EVENT TENT?

Event tents in our Crest Range are designed for those wanting to hold a corporate event, looking for outdoor wedding tents or other large function. Crest tents are available in a wide range of sizes and can be completely customized to meet your requirements. The width or “clear span” of our Crest Range starts at just 10 feet (3 meters) and can be as wide as an incredible 200 feet (60 meters). The length is virtually unlimited, being made up of individual bays that can be added on as needed. Bays can be 10 or 16 feet (3 to 5 meters) each. Popular event tent sizes are 20×40 feet (6×12 metres), ideal for home parties, and 33×66 feet (10×20 meters), which are best suited as outdoor wedding tents or corporate events. Modular floor systems, beautiful fabric ceilings and glass walls and doors are all options for this tent range. The Crest Range can also be fully custom printed for those wishing to transform their event tent into a major promotional product.

ORDERING YOUR LARGE CANOPY TENT FROM THE CREST RANGE

If you are in search of a large custom canopy for your next event, there is simply no better choice than an event tent from our Crest Range at Extreme Canopy. Made from the industry’s finest materials and available in a wide range of large sizes with several add-ons and custom printing options available, these large event tents are second to none in terms of performance, durability and customizable aesthetic appeal. To get started on creating your very own large canopy tent, contact us today!

Crest Tents are designed to metric measurements. All imperial dimensions are rounded. Crest Tents are designed assemi-permanent structures. Building code & regulation is site specific and as such checking compliance is the responsibility of the customer. If assistance is required Extreme Canopy can engage an engineer on request. A forklift may be required for delivery and set-up. Production & delivery time frames are approximations.